Lead Edge Feeder Rotary Die Cutting Machine

£3,000.00

Description

Paper Feeding Part

1. Adsorption automatic feeder, one-slotting, Cut corner, creasing, drilling.

2. precision die cutting from+0.75mm to-0.75mm

3. Phase planetary gear used electric adjustment, turn on and turn down were quick adjustment.

4. Before manually adjust block cardboard side block electric adjustment

5. Paper rollers have a plastic face, to prevent cardboard, to increase feed accuracy.

Die Cutting Part

1. Die cutting roller for the high quality steel materials,30mm thickness, balance correction, hard-chrome plating.

2. Wallboard for high-quality cast iron material,50mm thickness, and large processing center production.

3. Soft-roll automatic grinding institutions to pouches repeat usage,grinding3-4times;

4. Line speed automatic compensation to ensure that each batch of cardboard boxes full of die-size line;

5. Use Imported Polyurethane soft rubber, ease of installation, can cut 12000000 times.;

6. Mechanical soft roll about 40 mm lateral movement ,the pads wear uniform;

7. 40cr material the use of grinding gears for 6,low noise long life;

8. Die cutting roller cylinder automatic separation devices to reduce wear pouches.

Category:

Description

Paper Feeding Part

1. Adsorption automatic feeder, one-slotting, Cut corner, creasing, drilling.

2. precision die cutting from+0.75mm to-0.75mm

3. Phase planetary gear used electric adjustment, turn on and turn down were quick adjustment.

4. Before manually adjust block cardboard side block electric adjustment

5. Paper rollers have a plastic face, to prevent cardboard, to increase feed accuracy.

Die Cutting Part

1. Die cutting roller for the high quality steel materials,30mm thickness, balance correction, hard-chrome plating.

2. Wallboard for high-quality cast iron material,50mm thickness, and large processing center production.

3. Soft-roll automatic grinding institutions to pouches repeat usage,grinding3-4times;

4. Line speed automatic compensation to ensure that each batch of cardboard boxes full of die-size line;

5. Use Imported Polyurethane soft rubber, ease of installation, can cut 12000000 times.;

6. Mechanical soft roll about 40 mm lateral movement ,the pads wear uniform;

7. 40cr material the use of grinding gears for 6,low noise long life;

8. Die cutting roller cylinder automatic separation devices to reduce wear pouches.

Reviews

There are no reviews yet.

Be the first to review “Lead Edge Feeder Rotary Die Cutting Machine”

Your email address will not be published. Required fields are marked *